The Booster Power Supply (BPS) is a UL 864, 9th Edition listed
power supply. It is a 24 Vdc filtered-regulated, and supervised
unit that can easily be configured to provide additional notification
appliance circuits (NACs) or auxiliary power for Mass Notification/
Emergency Communication (MNEC), as well as life safety, security,
and access control applications.
The BPS contains the circuitry to monitor and charge internal
or external batteries. Its steel enclosure has room for up to two
10 ampere-hour batteries. For access control-only applications,
the BPS can support batteries totaling up to 65 ampere-hours in
an external enclosure. The BPS has four Class B (convertible to
two Class A) NACs. These can be activated in one or two groups
from the BPS’s unique dual input circuits.
The BPS is available in 6.5 or 10 ampere models. Each output
circuit has a capacity of three amperes; total current draw cannot
exceed the unit’s rating.
The BPS meets current UL requirements and is listed under the
following standards:
Standard (CCN)
UL864 9th ed.ition (UOXX)
Fire Alarm Systems
Holdup Alarm Units and Systems
Local Burglar Alarm Units and Systems
Access Control Systems
Police Station Connected Burglar Alarm Units and Systems
UL1076 (APOU, APOU7)
Proprietary Burglar Alarm System Units
UL1610 (AMCX)
Central Station Alarm Unit
Control Units, Fire Alarm (Canada)
ULC-S303 (AOTX7)
Local Burglar Alarm Units and Systems (Canada)
C22.2 No. 205
Signaling Equipment (Canada)
Standard Features
Allows for reliable filtered and regulated power to be installed
where needed
Cost effective system expansion
Provides for Genesis and Enhanced Integrity notification ap
pliance synchronization
Supports coded output operation
Self-restoring overcurrent protection
Multiple signal rates
Can be cascaded or controlled independently
Easy field configuration
On-board diagnostic LEDs identify wiring or internal faults
Standard EDWARDS keyed lockable steel cabinet with re
movable door
110 and 230 Vac models available
Accommodates 18 to 12 AWG wire sizes
Optional tamper switch
Dual battery charging rates
Optional earthquake hardening: OSHPD seismic pre-approval
for component Importance Factor 1.5